asus zenfone 3 max x008d frp bypass android-70

asus-zenfone-3-max-x008d-frp-bypass-android-70

Hotwav Cosmos V20 Firmware

Download Hotwav Cosmos V20 Firmware (Flash File)

Software Version: K19_HOTWAV_COSMOS_V20_168_20161217
Android Version: v6.0 (Marshmallow)
Download Size: 873 MB
File Extracting Password: hotwav.v20.pac.gsm
Download
Software Version: K19_HOTWAV_COSMOS_V21_168_20161220
Android Version: v6.0 (Marshmallow)
Download Size: 858 MB
Download

How To Flash Hotwav Cosmos V20 Firmware

Step 1: Download and extract Hotwav Cosmos V20 flash file on your Computer. After that, you will find SC7731 .pac Firmware inside the folder. Now open SPD Flash Tool and click on Load Packet button in Flash Tool then select the .pac Firmware file.

Hotwav ip7s plus

====  Wait for phone...

Phone found! [ 30 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!

PMTManager : Load 0x19 records
PMTManager : PMT Update Ok!
Flashing now

Update BootCode : u-boot-spl-16k.bin
Write Data ...
Write Data Ok!

Update BootCode : u-boot.bin
Erase block ...
Block erase Ok!
Write Data ...
Write Data Ok!

Write FSImage : prodnv.img
Write Data ...
Write Data Ok!

Write CodeData : sc7731g_CP0_modem.bin
Write Data ...
Write Data Ok!

Write CodeData : DSP_DM_Gx.bin
Write Data ...
Write Data Ok!

Erase Block : RuntimeData
Erase block ...
Block erase Ok!

Write CodeData : sc8830g_modem_CP2_WCN_14D_W16.29.3_Release.bin
Write Data ...
Write Data Ok!

Write CodeData : logo_720x1280.bin
Write Data ...
Write Data Ok!

Write CodeData : fblogo_720x1280.bin
Write Data ...
Write Data Ok!

Write CodeData : boot.img
Write Data ...
Write Data Ok!

Write FSImage : system.img
Write Data ...
Write Data Ok!

Erase Block : PERSIST
Erase block ...
Block erase Ok!

Write CodeData : sysinfo.img
Write Data ...
Write Data Ok!

Write FSImage : cache.img
Write Data ...
Write Data Ok!

Write CodeData : recovery.img
Write Data ...
Write Data Ok!

Erase Block : MISC
Erase block ...
Block erase Ok!

Write FSImage : userdata.img
Write Data ...
Write Data Ok!


Elapsed: 00:09:07

Reconnect Power/Cable!

-------------------------------------------------------Password Have