OUKITEL K4000 Firmware Filas File Download ||CM2 Read||

OUKITEL K4000 Firmware Filas File Download ||CM2 Read||
 Reading Flash Content now ... 

xGPT : Normalize settings Ok!

Brand     : OUKITEL
ProdName  : OUKITEL K4000
ProdModel : K4000
Device    : OUKITEL_K4000
AndroidVer: 5.1
MTKxCPU   : MT6735
MTKxPRJ   : ALPS.L1.MP3.V2.95_MAGC6735M.35GU.L1

[Read Ok] : preloader_magc6735m_35gu_l1.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6735M / V1.1.2 / magc6735m_35gu_l1 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
File Size : 454.01 MB
All done!

Done!
Elapsed: 00:05:15
Reconnect Power/Cable!

--------------------------------------------------------------------------------------------------- 
  --------------------------------------------------------Plz Share My Page
Account Log In Box:
anam.firmware@gmail.com
anam.firmware@yahoo.com
Skype ID=anam.mobile
Call=+8801814912492
Call=009607452014
IMO=009607452014
Viber=009607452014

Mi Account Remove Tool V1.5_Full_Anam.Firmware

Mi Account Remove Tool V1.5_Full_Anam.Firmware

------------------------------------------------------------------------------------------------

 --------------------------------------------------------Plz Share My Page
Account Log In Box:
anam.firmware@gmail.com
anam.firmware@yahoo.com
Skype ID=anam.mobile
Call=+8801814912492
Call=009607452014
IMO=009607452014
Viber=009607452014

Oukitel K4000 Lollipop Frp Unlock || CM2 ||

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 7 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 510001154D333238D797004265B7DCFA
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM328
[eMMC] : FLASH_CID : 150100513832334D420097D7FADCB265
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID    : 0xCB370AA0433B7A400874E149FEDA48EC
INT RAM    : 0x00020000
EXT RAM    : 0x80000000 [2 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Clear FRP ( Google Reset Protection )
Clear Ok!

Done!
Elapsed: 00:00:21
Reconnect Power/Cable!

------------------------------------------------------------------
 --------------------------------------------------------Plz Share My Page
Account Log In Box:
anam.firmware@gmail.com
anam.firmware@yahoo.com
Skype ID=anam.mobile
Call=+8801814912492
Call=009607452014
IMO=009607452014
Viber=009607452014 

Symphony Xplorer W86 Firmware Download || CM2 Read ||

Reading Flash Content now ...

USBDL : Init HSUSB Ok!

Brand     : Symphony_Xplorer_W86
ProdName  : Symphony_Xplorer_W86
ProdModel : Symphony Xplorer W86
Device    : wt97601
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : W86_1_XXX_V01.0_M12_07_UPDATE1

[Read Ok] : preloader_wt97601.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / wt97601 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved

File size: 276.7 MB

All done!

 --------------------------------------------------------Plz Share My Page
Account Log In Box:
anam.firmware@gmail.com
anam.firmware@yahoo.com
Skype ID=anam.mobile
Call=+8801814912492
Call=009607452014
IMO=009607452014
Viber=009607452014

Lenovo Tab A3300-HV Firmware Download || CM2 Read ||

Boot Ok!
Reading Flash Content now ...

Brand     : Lenovo
ProdName  : A3300-HV
ProdModel : LenovoA3300-HV
Device    : A3300-HV
AndroidVer: 4.4.2
MTKxCPU   : MT6582
MTKxPRJ   : A3300HV_A442_01_19_140827_ROW

[Read Ok] : preloader_huaqin82_tb_b2d_kk.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img


All done!
File size: 693.82 MB
 Done!
Elapsed: 00:06:09
Reconnect Power/Cable!

------------------------------------------------------Plz Share My Page
Account Log In Box:
anam.firmware@gmail.com
anam.firmware@yahoo.com
Skype ID=anam.mobile
Call=+8801814912492
Call=009607452014
IMO=009607452014
Viber=009607452014

SANNO M8 SPD7731 CPU Firmware Download ||CM2 Read||

Model Name  : sp7731geaplus_dt_overseaModel Brand : SANNOModel Device: scx35_sp7731gea
AndrVersion : 5.1
BaseBand CPU: SP7731GEA
Project Ver : SC7731G_W10_THX_X20_SANNO_QHD_RV1.1_20160922
Model Ext   : M8

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.31.1_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_540x960.bin
[Read Ok] : fblogo_540x960.bin
[Read Ok] : logo02.bin
[Read Ok] : logo03.bin
[Read Ok] : logo04.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1448 MiB
All Done!

 --------------------------------------------------------Plz Share My Page
Account Log In Box:
anam.firmware@gmail.com
anam.firmware@yahoo.com
Skype ID=anam.mobile
Call=+8801814912492
Call=+9607452014
IMO=+9607452014
Viber=+9607452014

Lenovo S8 (S898T Plus) Firmware Download

Official Lenovo S8 (S898T Plus) Stock Rom / Firmware

Device	os	Country	Size	Download Firmware
Lenovo	Kitkat	International	679MB	VIBEUI_V2.0_1516_7.25.1_DEV_S898t+.zip
S898t+	4.4.2		947MB	vibeui_v2.0_1503_7.18.1_st_s898t+.zip
			683MB	VIBEUI_V2.0_1447_7.5.1_ST_S898t+.zip
		RU, EN, CN	640MB	VIBEUI_V2.0_1516_7.21.1_ST_S898t+.zip
			630MB	VIBEUI_V2.0_1443_7.4.1_ST.zip
			816MB	VIBEUI_V2.0_1437_7.3.1_ST_S898t+.zip
			683MB	VIBEUI_V2.0_1515_7.24.1_DEV_S898tp.zip
	Jellybean	International	780MB	Lenovo_S898T_Plus_4.2.2.zip
	4.2.2		749MB	VIBEUI_V2.0_1516_7.25.1_DEV_S898t+.zip

LG G2 D800 AT&T Stock Firmware

Unroot AT&T LG G2 D800

As users of Android device, they are unrestricted to a sense of exciting activity and freedom that comes after rooting their device and installing a custom recovery on it. If you have a root access on your Android® device such as your LG G2 phone, you have the opportunity to install various applications that require root permission and as a result, tweak your device, customize it, get better battery life, remove bloat apps and so on. By installing a custom recovery, you can try a custom ROM and enjoy accessing the enhanced features of your device.
Disclaimer:
This method described below has been tested and found working successfully on AT&T LG G2 D800. But still we do not guarantee that it will work to anyone’s phone. In many cases, users’ mistake leads to failure. Follow the tutorial process that we recommend at you own responsibility. Also, installing the stock firmware will wipe out your phone’s data. Do not forget to backup the data of your phone first especially those data that are important.

Return Back  AT&T LG G2 D800 to stock firmware:

If you own an AT&T  LG G2, here’s how you can install the stock firmware to your phone. Again this process is to restore AT&T LG G2 D800 to Stock Firmware and cannot be used on any other LG G2 variants.  Before you do the installation process, please check your phone’s model by going to the Settings> About> Model.
Download:
1. LGFlashTools v1.5 – Download
2. LG USB Driver – Download and install the LG USB Drivers and install on your computer.

The ATT version is called LG D800. This guide is specifically for LG D800.
LG D800 ships with a custom Android Firmware that has been “enhanced” by LG and ATT. As of this writing the D800 was being shipped with the firmware version D80010d (there is an OTA update – D80010o / D80100q / D80200c (KITKAT) that your phone will ask you to update to. PLEASE DO NOT if you want to install custom roms. If you already have go to section 4 to downgrade your phone back to D80100d).

1. Download the (LGD800 stock firmware) for AT&T LG G2 D800 users: Download the STOCK firmware and the DLL file both (extract it if it is a ZIP file.
2. a. The D80020c KitKat can be flashed over D80010d and D80010o firmware
   b.You will lose Root
   c. NO WAY TO ROOT YET
   d.You can use Lg Flash Tools to go back to 10d,10o.

Now run the Flash Tool setup file and install it. When it is installed, do not launch it.
Enable USB Debugging on your LG G2 D800 from Settings. 

1. Enable Developer option (General Settings -> About Phone -> Software Information and tap “Build Number” repeatedly(7-10 times) till you see a toast notification )
2. Enable USB Debugging on your device from Settings> Developers options.

Now install the USB Drivers and reboot the computer. To ensure that the drivers have been installed correctly, put your device in Download Mode and then connect it to the PC. You can boot your device in Download Mode this way: Turn off the phone and press the Volume Up button while plugging the USB cable. In case, this method does not work, try the same procedure with holding the ‘Volume Up and Down’ keys both.
Then press Windows + X on your computer’s keyboard and select Device Manager. You should see LG phone listed under COM ports. Right click LGE AndroidNet USB Serial Port (COM2) lg-usb-drivers
Then select Properties> Advanced and change the COM port to COM41. Save the changes and exit. LG-USB-Driver-Installation
When the device drivers have been setup, disconnect your LG G2.
It’s time now to launch the LG Flash Tools, but before doing that—
Set your computer’s date to July 2012.
Disconnect internet connection.
Please take note that the LG Flash Tools require a registration serial key to function. You can search the web to find a working serial key for the program.
Open the LG Flash Tool and input the key.

Now you’ll see a dialog box.
Click on Add button on S/W field and load the firmware file with .TOT extension. Then click the .DLL field and add the DLL file here.lg-flash-tool-1
Click OK.
Now click on the Yellow arrow button on the top left. Doing this initialize the installation process.
When it is done, you’ll see Ready message.lg-flash-tool-2
Unplug your phone now and boot it into Download Mode (Turn off device PRESS VOL UP while plugging in the micro usb cable. If this doesn’t work, try holding both volume keys instead)
As soon as your G2 is connected to PC via USB, it should start flashing the firmware automatically.
At the completion of the process, your AT&T will reboot automatically and hopefully it’ll be running the newly installed stock firmware.
By the time you read these lines, you might have already restored your LG G2 to the stock firmware. Was the process gone right? Were they easy, or did you stumble upon issues? Whether you made it or not, feel free to let us know. Share your comments with us.
Source: XDA & XDA
--------------------------------------------------------------------------
 --------------------------------------------------------Plz Share My Page
Account Log In Box:
anam.firmware@gmail.com
anam.firmware@yahoo.com
Skype ID=anam.mobile
Call=+8801814912492
Call=+9607452014
IMO=+9607452014
Viber=+9607452014

HTC One MTK6582 Firmware Download

Card found : S/N : B3613EB2 , v0134
Chinese Miracle II  [MTK module] v 1.58

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 7 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004B3758564D420131CED6C8A1E3
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMVX7
[eMMC] : FLASH_CID : 1501004B3758564D420131CED6C8A1E3
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xCB370AA0585798C440790F0B33F97C4A
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand     : htc
ProdName  : htccn_chs
ProdModel : HTC One
Device    : htc_m8tl
AndroidVer: 4.4.2
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.JB5.MP.V1.21

[Read Ok] : preloader_vigor82_wet_jb5.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / vigor82_wet_jb5 / EMMC
Android Info saved


MAUI Meta DB saved
HWConfig Info saved
FW Size : 831 MiB
Scatter saved to : C:\Users\ain\Desktop\htc one.mtk\MT6582__htc__HTC_One__htc_m8tl__4.4.2__ALPS.JB5.MP.V1.21\

All done!

Done!
Elapsed: 00:04:22
Reconnect Power/Cable!
--------------------------------------------------------------------------------------
Download Link-HTC One Htc m8tl MTK6582

 --------------------------------------------------------Plz Share My Page
Account Log In Box:
anam.firmware@gmail.com
anam.firmware@yahoo.com
Skype ID=anam.mobile
Call=+8801814912492
Call=+9607452014
IMO=+9607452014
Viber=+9607452014

 

 

redmi note 3 mi account Remove((Anam Firmware))

redmi note 3 mi account Remove((Anam Firmware))

-----------------------------------------------------------
--------------------------------------------------------Plz Share My Page
Account Log In Box:
anam.firmware@gmail.com
anam.firmware@yahoo.com
Skype ID=anam.mobile
Call=+8801814912492
Call=+9607452014

inew l3 Firmware Flash File((Anam.Firmware))

Download Here-inew l3 v1.1.3

--------------------------------------------------------Plz Share My Page
Account Log In Box:
anam.firmware@gmail.com
anam.firmware@yahoo.com 
Skype ID=anam.mobile
Call=+8801814912492
Call=+9607452014

S4 Samsung MT6575 GT-I9505 Firmware Flash File

Card found : S/N : B3613EB2 , v0134

Chinese Miracle II  [MTK module] v 1.58

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 14 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6575
BB_CPU_NME : [MediaTek] MT6575|MT6577_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0xE201
Processing BROM stage

i2c Init : 00000000
SpeedSet : 0000
VChrgSet : 0x28 , BatStat : 0x02
WD Disable stat : 0x0000
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.3.2 on BBID : 0x84
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , M00SJ
[eMMC] : FLASH_CID : 1501004E4A5330304D009C0E696F3081
[eMMC] : FLASH_BRT : 0x00100000 , 0x00100000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 0xCB370AA0661A8929F3FCEE36DC2447B8
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand     : samsung
ProdName  : Galaxy-S4
ProdModel : Galaxy-S4
Device    : GT-I9505
AndroidVer: 4.2.2
MTKxCPU   : MT6575
MTKxPRJ   : ALPS.ICS2.MP.V1.20

[Read Ok] : preloader_mobitek75_ics2.bin
[Read Ok] : DSP_BL
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6575 / V1.0.0 / mobitek75_ics2 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 543 MiB
Scatter saved to : C:\Users\ain\Desktop\s4\MT6575__samsung__Galaxy-S4__GT-I9505__4.2.2__ALPS.ICS2.MP.V1.20\

All done!

Done!
Elapsed: 00:04:53
Reconnect Power/Cable!
---------------------------------------------------------------------------------------------

 Download Here-MT6575 GT-I9505

--------------------------------------------------------Plz Share My Page
Account Log In Box:
anam.firmware@gmail.com
anam.firmware@yahoo.com
Call=+8801814912492
Call=+9607452014

Z3x Samsung Tool Pro V27.4 Download((Anam.Firmware))

Z3x Samsung Tool Pro V27.4 Download

Z3x amazing mobile tool for Samsung phones free download from here. If you want to download Z3x box Samsung tool then you are coming right place. Z3x box latest updates Version V27.4 is avail to download directly without waiting. 

Z3X Box Samsung Tool PRO its not cracked its a original box setup

Z3x box helps you to unlock or flash your Samsung phones, You can flash or unlock easily your Samsung phones by using Z3x box. This is latest updates V27.4 for Z3x Samsung box and you can download this updates from its official link. Official download link for this tool is avail at the end of below post.

Latest Features Of Z3x Samsung, LG Box

Smart card updates regularly.

Multilingual software interface.

Automatically login to support area from software.

Configuration files from other users.

Automatically inform you new updates. 

If you want to download Z3x box for Samsung mobiles, Click here to download Z3x box for Samsung mobiles or devices..

Samsung Tool PRO 27.4 Released. Patch cert new FW G930x/G935x, New method reset FRP in flash mode)

Some hot solution again added and some fix, we hope all z3x pro users will be happy.

Added:

- support patch CERT on new FW G930x/G935x 

- support SM-G600F (Unlock(root) Direct (not root) Read codes (world first), Direct (no root) Read Cert (world first), Write CERT, Repair IMEI, Patch CERT (repair network) - (world first))

- support SM-G610L (Unlock(root) Direct (not root) Read codes (world first), Direct (no root) Read Cert (world first), Write CERT, Repair IMEI, Patch CERT (repair network) - (world first))

- support SM-G610S (Unlock(root) Direct (not root) Read codes (world first), Direct (no root) Read Cert (world first), Write CERT, Repair IMEI, Patch CERT (repair network) - (world first))

- Addition support SM-A9000 (New method reset FRP in flash mode)

- Addition support SM-A9100 (New method reset FRP in flash mode)

- Addition support SM-A910F (New method reset FRP in flash mode)

- Addition support SM-С5000 (New method reset FRP in flash mode)

- Addition support SM-С7000 (New method reset FRP in flash mode)

- Addition support SM-G360T (New method reset FRP in flash mode)

- Addition support SM-G360T1 (New method reset FRP in flash mode)

- Addition support SM-G530P (New method reset FRP in flash mode)

- Addition support SM-G530T (New method reset FRP in flash mode)

- Addition support SM-G530W (New method reset FRP in flash mode)

- Addition support SM-G5500 (New method reset FRP in flash mode)

- Addition support SM-G550F (New method reset FRP in flash mode)

- Addition support SM-G550FY (New method reset FRP in flash mode)

- Addition support SM-G550T (New method reset FRP in flash mode)

- Addition support SM-G550T1 (New method reset FRP in flash mode)

- Addition support SM-G550T2 (New method reset FRP in flash mode)

- Addition support SM-G9200 (New method reset FRP in flash mode)

- Addition support SM-G9208 (New method reset FRP in flash mode)

- Addition support SM-G9209 (New method reset FRP in flash mode)

- Addition support SM-G920A (New method reset FRP in flash mode)

- Addition support SM-G920AZ (New method reset FRP in flash mode)

- Addition support SM-G920D (New method reset FRP in flash mode)

- Addition support SM-G920F (New method reset FRP in flash mode)

- Addition support SM-G920FD (New method reset FRP in flash mode)

- Addition support SM-G920FQ (New method reset FRP in flash mode)

- Addition support SM-G920I (New method reset FRP in flash mode)

- Addition support SM-G920K (New method reset FRP in flash mode)

- Addition support SM-G920L (New method reset FRP in flash mode)

- Addition support SM-G920R4 (New method reset FRP in flash mode)

- Addition support SM-G920P (New method reset FRP in flash mode)

- Addition support SM-G920S (New method reset FRP in flash mode)

- Addition support SM-G920T (New method reset FRP in flash mode)

- Addition support SM-G920T1 (New method reset FRP in flash mode)

- Addition support SM-G920V (New method reset FRP in flash mode)

- Addition support SM-G920W8 (New method reset FRP in flash mode)

- Addition support SM-G9250 (New method reset FRP in flash mode)

- Addition support SM-G925A (New method reset FRP in flash mode)

- Addition support SM-G925D (New method reset FRP in flash mode)

- Addition support SM-G925F (New method reset FRP in flash mode)

- Addition support SM-G925FQ (New method reset FRP in flash mode)

- Addition support SM-G925I (New method reset FRP in flash mode)

- Addition support SM-G925J (New method reset FRP in flash mode)

- Addition support SM-G925K (New method reset FRP in flash mode)

- Addition support SM-G925L (New method reset FRP in flash mode)

- Addition support SM-G925P (New method reset FRP in flash mode)

- Addition support SM-G925R4 (New method reset FRP in flash mode)

- Addition support SM-G925S (New method reset FRP in flash mode)

- Addition support SM-G925T (New method reset FRP in flash mode)

- Addition support SM-G925V (New method reset FRP in flash mode)

- Addition support SM-G925W8 (New method reset FRP in flash mode)

- Addition support SM-G925Z (New method reset FRP in flash mode)

- Addition support SM-G9280 (New method reset FRP in flash mode)

- Addition support SM-G9287 (New method reset FRP in flash mode)

- Addition support SM-G9287C (New method reset FRP in flash mode)

- Addition support SM-G928A (New method reset FRP in flash mode)

- Addition support SM-G928C (New method reset FRP in flash mode)

- Addition support SM-G928F (New method reset FRP in flash mode)

- Addition support SM-G928G (New method reset FRP in flash mode)

- Addition support SM-G928I (New method reset FRP in flash mode)

- Addition support SM-G928K (New method reset FRP in flash mode)

- Addition support SM-G928L (New method reset FRP in flash mode)

- Addition support SM-G928N0 (New method reset FRP in flash mode)

- Addition support SM-G928P (New method reset FRP in flash mode)

- Addition support SM-G928S (New method reset FRP in flash mode)

- Addition support SM-G928T (New method reset FRP in flash mode)

- Addition support SM-G928W8 (New method reset FRP in flash mode)

- Addition support SM-J320N0 (New method reset FRP in flash mode)

- Addition support SM-J320P (New method reset FRP in flash mode)

- Addition support SM-J320R4 (New method reset FRP in flash mode)

- Addition support SM-J320Y (New method reset FRP in flash mode)

- Addition support SM-J320YZ (New method reset FRP in flash mode)

- Addition support SM-J320ZN (New method reset FRP in flash mode)

- Addition support SM-J5007 (New method reset FRP in flash mode)

- Addition support SM-J500F (New method reset FRP in flash mode)

- Addition support SM-J500FN (New method reset FRP in flash mode)

- Addition support SM-J500G (New method reset FRP in flash mode)

- Addition support SM-J500H (New method reset FRP in flash mode)

- Addition support SM-J500M (New method reset FRP in flash mode)

- Addition support SM-J500N0 (New method reset FRP in flash mode)

- Addition support SM-J500Y (New method reset FRP in flash mode)

- Addition support SM-J510F (New method reset FRP in flash mode)

- Addition support SM-J510FN (New method reset FRP in flash mode)

- Addition support SM-J510GN (New method reset FRP in flash mode)

- Addition support SM-J510H (New method reset FRP in flash mode)

- Addition support SM-J510K (New method reset FRP in flash mode)

- Addition support SM-J510L (New method reset FRP in flash mode)

- Addition support SM-J510MN (New method reset FRP in flash mode)

- Addition support SM-J510S (New method reset FRP in flash mode)

- Addition support SM-J510UN (New method reset FRP in flash mode)

- Addition support SM-J7109 (New method reset FRP in flash mode)

- Addition support SM-P350 (New method reset FRP in flash mode)

- Addition support SM-P355 (New method reset FRP in flash mode)

- Addition support SM-P355M (New method reset FRP in flash mode)

- Addition support SM-P550 (New method reset FRP in flash mode)

- Addition support SM-P555 (New method reset FRP in flash mode)

- Addition support SM-P555C (New method reset FRP in flash mode)

- Addition support SM-P555K (New method reset FRP in flash mode)

- Addition support SM-P555L (New method reset FRP in flash mode)

- Addition support SM-P555M (New method reset FRP in flash mode)

- Addition support SM-P555S (New method reset FRP in flash mode)

- Addition support SM-P555Y (New method reset FRP in flash mode)

- Addition support SM-T355 (New method reset FRP in flash mode)

- Addition support SM-T355C (New method reset FRP in flash mode)

- Addition support SM-T355Y (New method reset FRP in flash mode)

- Addition support SM-T357W (New method reset FRP in flash mode)

- Addition support SM-T536 (New method reset FRP in flash mode)

- Addition support SM-T550 (New method reset FRP in flash mode)

- Addition support SM-T555 (New method reset FRP in flash mode)

- Addition support SM-T555C (New method reset FRP in flash mode)

- Addition support SM-T713 (New method reset FRP in flash mode)

- Addition support SM-T719 (New method reset FRP in flash mode)

- Addition support SM-T719C (New method reset FRP in flash mode)

- Addition support SM-T719Y (New method reset FRP in flash mode)

- Addition support SM-T813 (New method reset FRP in flash mode)

- Addition support SM-T819 (New method reset FRP in flash mode)

- Addition support SM-T819C (New method reset FRP in flash mode)

- Addition support SM-T819Y (New method reset FRP in flash mode)

Fixed:

- J120W read codes/cert

- Read codes/CERT/unlock on Shannon305 (G570F...)

- check CERT on Shannon315 (J710F ..)

- "Install now" function ("update available" window)

Download: Samsung Tool PRO V27.4.exe

Download: Samsung Tool PRO V27.2.exe

Download: Samsung Tool PRO V27.1.exe

Download: Samsung Tool PRO V27.0.exe

Download: Samsung Tool PRO V26.9.exe
-----------------------------------------------------------------------------------------
-----------------------------------------------------------Plz Share My Page
Account Log In Box:
anam.firmware@gmail.com
anam.firmware@yahoo.com
Call=+8801814912492
Call=+9607452014

OPPO R827 Firmware Flash File((ANAM.FIRMWARE))

Card found : S/N : B3613EB2 , v0134

Chinese Miracle II  [MTK module] v 1.58

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 15 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A483447316404050DA20953C189
Initialize Memory ...
DRAM configured from IDB!
DRAM initialize passed!
DRAM size : 0x40000000
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d1G4
[eMMC] : FLASH_CID : 90014A483447316404050DA20953C189
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 0xCB370AA076497F10230AEF8BBD65D303
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...
USBDL : Init HSUSB Ok!

Brand     : OPPO
ProdName  : OPPO82_13071
ProdModel : R827
Device    : R827
AndroidVer: 4.2.2
MTKxCPU   : MT6582
MTKxPRJ   : R827_11_A.16_160330

[Read Ok] : preloader_oppo82_13071.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : EBR2
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / oppo82_13071 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 931 MiB
Scatter saved to : C:\Users\ain\Desktop\oppo\MT6582__OPPO__R827__R827__4.2.2__R827_11_A.16_160330\

All done!

Done!
Elapsed: 00:04:19
Reconnect Power/Cable!
-----------------------------------------------------------------------------
Download Here-OPPO__R827
 
-----------------------Plz Share My Page
Account Log In Box:
anam.firmware@gmail.com
anam.firmware@yahoo.com
Call=+8801814912492
Call=+9607452014

Nokia RM 1133 Flash File-Anam Firmware

Card found: S/N : 439B160A , v0122
Registered to: gsmanam

Connect phone on selected interface...

Core : v2.23 , MTKx FlashEngine : v10.1

Verify files ...
MAUI : RM-1133_ROM_eMP_10.01.11
VIVA : RM-1133_VIVA_eMP_10.01.11
LANG : RM-1133_LANG_PACK_ROM_MS_eMP_10.01.11_004
CUST : RM-1133_CUSTPACK_ROM_MS_MEA_BD_eMP_10.01.11_004
JMPT : RM-1133_JUMP_TABLE_MS_MEA_BD_eMP_10.01.11_004
 - > MODE : FullFlash

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
 - > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 27 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0001
BB_CPU_SN : 9C6668805E1DA67B99C0ADFDFA8D8C56
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : LAGOS61D.10.01.11.p2
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Lagos.fg
DA_VERIFY : 00
DA_JUMP   : 00100000
DA_AUTH   : Passed!
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8E
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00EC , [GigaDevice] GD25LQ32
[0] : FLASH_DIE : 00C8 0060 0016 0000
[0] : FLASH_LEN : 0x00400000
FAT_RANGE : 0x00368000-0x003F7FFF , LEN : 0x00090000
SecureDecrypt : RM-1133_ROM_eMP_10.01.11
SecureDecrypt : RM-1133_VIVA_eMP_10.01.11
SecureDecrypt : RM-1133_LANG_PACK_ROM_MS_eMP_10.01.11_004
SecureDecrypt : RM-1133_CUSTPACK_ROM_MS_MEA_BD_eMP_10.01.11_004
SecureDecrypt : RM-1133_JUMP_TABLE_MS_MEA_BD_eMP_10.01.11_004
OVRLP : 000069B900000001
PHPID : LAGOS61D.10.01.11.p2
OVRLP : 00004DF900000001
DA : FORMAT_BIN
Processing Flash Pre-format
FILES : 5
SAFE_BLOCK : 04
FORMAT_BIN : Ok
WRITE_STYLE : DEF : 0x01 (SEQ)
Write : RM-1133_ROM_eMP_10.01.11
Write : RM-1133_LANG_PACK_ROM_MS_eMP_10.01.11_004
Write : RM-1133_CUSTPACK_ROM_MS_MEA_BD_eMP_10.01.11_004
Write : RM-1133_JUMP_TABLE_MS_MEA_BD_eMP_10.01.11_004
Write : RM-1133_VIVA_eMP_10.01.11
CODE_DNLOAD : Ok
[VERIFY] DONE : RM-1133_ROM_eMP_10.01.11
[VERIFY] DONE : RM-1133_LANG_PACK_ROM_MS_eMP_10.01.11_004
[VERIFY] DONE : RM-1133_CUSTPACK_ROM_MS_MEA_BD_eMP_10.01.11_004
[VERIFY] DONE : RM-1133_JUMP_TABLE_MS_MEA_BD_eMP_10.01.11_004
[VERIFY] DONE : RM-1133_VIVA_eMP_10.01.11
CODE_VERIFY : Ok
FORMAT FFS : skipped
Rebooting phone now

Flashing done!
Total flash time : 00:00:47
Reboot phone Ok

Connect phone on selected interface...
-----------------------------------------------------------------------------------
Download Here-RM-1133 ROM
-----------------------Plz Share My Page
Account Log In Box:
anam.firmware@gmail.com
anam.firmware@yahoo.com
Call=+8801814912492
Call=+9607452014

Nokia RM-1135 Flash File-Anam.Firmware

Card found: S/N : 439B160A , v0122
Registered to: gsmanam

Connect phone on selected interface...

Core : v2.23 , MTKx FlashEngine : v10.1

Verify files ...
MAUI : RM-1035_ROM_eMP_10.02.11
VIVA : RM-1035_VIVA_eMP_10.02.11
LANG : RM-1035_LANG_PACK_ROM_AA_eMP_10.02.11_001
CUST : RM-1035_CUSTPACK_ROM_AA_EURO_FI_eMP_10.02.11_001
JMPT : RM-1035_JUMP_TABLE_AA_EURO_FI_eMP_10.02.11_001
 - > MODE : FullFlash

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
 - > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 27 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : DF4A096A0EE5751D8EF7C33F933440B6
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : CRYSTAL.10.02.11.p1
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Crystal.fg
DA_VERIFY : 00
DA_JUMP   : 00040000
DA_AUTH   : Passed!
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00E2 , [WINBOND] W25Q32BV
[0] : FLASH_DIE : 00EF 0040 0016 0000
[0] : FLASH_LEN : 0x00400000
FAT_RANGE : 0x003A4000-0x003F3FFF , LEN : 0x00050000
SecureDecrypt : RM-1035_ROM_eMP_10.02.11
SecureDecrypt : RM-1035_VIVA_eMP_10.02.11
SecureDecrypt : RM-1035_LANG_PACK_ROM_AA_eMP_10.02.11_001
SecureDecrypt : RM-1035_CUSTPACK_ROM_AA_EURO_FI_eMP_10.02.11_001
SecureDecrypt : RM-1035_JUMP_TABLE_AA_EURO_FI_eMP_10.02.11_001
OVRLP : 000069B900000001
PHPID : CRYSTAL.10.02.11.p1
OVRLP : 00004DF900000001
DA : FORMAT_BIN
Processing Flash Pre-format
FILES : 5
SAFE_BLOCK : 04
FORMAT_BIN : Ok
WRITE_STYLE : DEF : 0x01 (SEQ)
Write : RM-1035_ROM_eMP_10.02.11
Write : RM-1035_LANG_PACK_ROM_AA_eMP_10.02.11_001
Write : RM-1035_CUSTPACK_ROM_AA_EURO_FI_eMP_10.02.11_001
Write : RM-1035_JUMP_TABLE_AA_EURO_FI_eMP_10.02.11_001
Write : RM-1035_VIVA_eMP_10.02.11
CODE_DNLOAD : Ok
[VERIFY] DONE : RM-1035_ROM_eMP_10.02.11
[VERIFY] DONE : RM-1035_LANG_PACK_ROM_AA_eMP_10.02.11_001
[VERIFY] DONE : RM-1035_CUSTPACK_ROM_AA_EURO_FI_eMP_10.02.11_001
[VERIFY] DONE : RM-1035_JUMP_TABLE_AA_EURO_FI_eMP_10.02.11_001
[VERIFY] DONE : RM-1035_VIVA_eMP_10.02.11
CODE_VERIFY : Ok
FORMAT FFS : skipped
Rebooting phone now

Flashing done!
Total flash time : 00:00:51
Reboot phone Ok

Connect phone on selected interface...
----------------------------------------------------------------------
Download Here-Nokia RM-1135
------------------------------------------------Plz Share My Page
Account Log In Box:
anam.firmware@gmail.com
anam.firmware@yahoo.com
Call=+8801814912492
Call=+9607452014

X6_PRO-G+_Firmware Flash File

MT6572__G650B__X6_PRO__G650B__5.1.0

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 14 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 45010053454D3034473A03E8E25D3297
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x45 , OEM : 0100
[eMMC] : FLASH_INF : [SANDISK] , G40ME
[eMMC] : FLASH_CID : 45010053454D3034473A03E8E25D3297
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB]
DEV RID    : 0xCB370AA0F38557423509058101C5E25D
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand     : G650B
ProdName  : X6 PRO
ProdModel : X6 PRO
Device    : G650B
AndroidVer: 5.1.0
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.KK1.MP7.V1

[Read Ok] : preloader_yuanda72_cwet_kk.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / yuanda72_cwet_kk / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 678 MiB
Scatter saved to : C:\Users\ain\Desktop\New folder (8)\New folder\MT6572__G650B__X6_PRO__G650B__5.1.0__ALPS.KK1.MP7.V1\

All done!

Done!
Elapsed: 00:04:00
Reconnect Power/Cable!
--------------------------------------------------------------------------------------------------------
Download Here-MT6572__G650B__X6_PRO

-------------------------------------------------------------------------------------Plz Share My Page
Account Log In Box:
anam.firmware@gmail.com
anam.firmware@yahoo.com
Call=+8801814912492
Call=+9607452014

SM-G920F_MT6572_Nand_Galaxy+S6__5.1.1_Anam.Firmware

Download Here-SM-G920F_MT6572_Nand_Galaxy+S6__5.1.1

------------------------------------Plz Share My Page
Account Log In Box:
anam.firmware@gmail.com
anam.firmware@yahoo.com
Call=+8801814912492
Call=+9607452014